Slide background AEROSTRIP® diffusers by AquaConsult provide significant benefits to industrial and municipal wastewater treatment plants throughout Australia.

AEROSTRIP® Modules – High Flux

Hydroflux HUBER supply two types of High Flux (40-120 Nm³/h/m²) AEROSTRIP® Phoenix modules, both ideal for maximum performance in high solids loading’s and/or high fouling municipal and industrial applications.

For maximum performance in standard municipal and industrial applications we recommend the Low Flux AEROSTRIP® Membrane.

AEROSTRIP® has developed the Phoenix membrane for even higher reliability in industrial applications, membrane bioreactors and aerobic digestion processes.

Industrial applications can have higher fouling factors due to the presence of impurities or high organic content. Similarly, for membrane bioreactors and digesters, the high suspended solids loads result in an increase in the amount of diffusers required to achieve the design oxygen transfer.

AEROSTRIP® TYPE T – HIGH FLUX AEROSTRIP® TYPE Q – HIGH FLUX
  • Base plate made of stainless steel (AISI 316Ti)
  • Polyurethane Membrane
  • Available in 0.5m increments from 1m to 4m
  • 1″ upward pointed air connection
  • High flux rate: 40 -120 Nm³/h per m² diffuser surface with max. 120 Nm³/h
  • Pressure drop of 35 – 60 mbar
  • Identical high quality polyurethane membrane material to the standard diffuser
  • Ideal for industrial wastewater with high fouling potential
  • Ideal of membrane bioreactors and aerobic digesters
  • Flexible and easy installation
  • No wearing parts
  • Easy handling
  • Sturdy PVC Body
  • Polyurethane Membrane
  • Available in 0.5m increments from 0.5m to 4m
  • Membrane protection design
  • Check valve incorporated
  • Horizontal compression fitting air connection
  • Specific air flow: 40 – 120 Nm³/h per m² diffuser surface with max. 120 Nm³/h
  • Pressure drop of 35 – 60 mbar
  • Identical high quality polyurethane membrane material to the standard diffuser
  • Ideal for industrial wastewater with high fouling potential
  • Ideal of membrane bioreactors and aerobic digesters
  • Flexible and easy installation
  • No wearing parts
  • Easy membrane replacement
aerostripdiagram2ss aerostripdiagram1

The Phoenix membrane is yet another world leading innovation by AEROSTRIP®. This membrane has an enhanced micro perforation pattern that allows high air flow rates with reduced pressure loss, making it ideal for high loading applications.

This means less diffusers for high fouling or low alpha factor applications.

Hydroflux HUBER can provide an instant aeration design for your WWTP utilising a proprietary AEROSTRIP® Design Tool.

Click the links below to learn more about AEROSTRIP®:

Brochures

Download Hydroflux HUBER AEROSTRIP® Low Flux Brochure

Hydroflux HUBER AEROSTRIP® Low Flux Brochure

Download Hydroflux HUBER AEROSTRIP® Brochure

Hydroflux HUBER AEROSTRIP® Type Q Low Flux Datasheet

Download Hydroflux HUBER AEROSTRIP® Brochure

Hydroflux HUBER AEROSTRIP® Type T Low Flux Datasheet

Case Studies

Aerostrip Rockhampton STP Aeration case study Hydroflux Huber

AEROSTRIP® Installation Rockhampton WWTP, Australia

Hydroflux HUBER product solutions are fully equipped, ready for operation. This complete offer allows clients to consider the best technical solutions available via the most efficient process

productbottombanner1